Polylok Product Catalog - Volume 7

Seals, Baffles, Mandrels & Accs. Rebar Spacers & Precast Accs. POLYLOK UV DISINFECTION UNIT & HIGH PRESSURE FILTERS l 14 PL-UV1 Description Part Number(s) Features Polylok UV disinfection unit reduces bacteria levels from secondary effluent to achieve strict water quality standards PL-UV1 PL-UVB-2PRONG (replacement bulb) • Dual pass design • Weatherproof electrical components • Long-life UV bulb • No chemical residual or harmful by-products • Low electrical usage • Easy to install and operate • UL listed US & Canada Effluent Filters & Accs. Risers, Adapters, Covers & Accs. Distribution Boxes & Accs. Grates, Catch Basins, Trench Drains & Drainage Accs. Pumps, Alarms & Accs. Basins & Accs. Stainless Steel Reinforced Plastic Description Part Number(s) Features Polylok high pressure filter with stainless steel filter cartridge. 3014-PF 3014-Sock (600 micron Sock) • Mounts directly onto the 2” discharge end of any pump • Filter available in heavy duty stainless steel or reinforced plastic • Filter can use 600 micron sock for fine filtration • Twist & Lok cover provides both watertightness and easy access for filter maintenance • Extension handle available for deep installations Polylok high pressure filter with reinforced plastic filter cartridge. 3014-PFP 3014-Sock (600 micron Sock) HIGH PRESSURE FILTER Our high pressure filter is extremely effective in providing protection for all pressurized distribution systems. If you need to protect a pressurized system from suspended solids, the pressure filter can perform the job. Most pressurized wastewater distribution systems such as mound systems are very effective in treating effluent. In pressurized systems the effluent, or gray water, is pumped from the holding or pump chamber of the septic system out to the drain field by a low pressure effluent pump. FLOW RATES 100 GPD through 8,640 GPD (Gravity flow only) REQUIRED INFLUENTCHARACTERISTICS • 100 GPD - 4,320 GPD (3 GPM) with a 30 mg/L BOD and 30 mg/L SS • 4,321 GPD - 8,640 GPD (6 GPM) with a 10 mg/L BOD and 10 mg/l SS UV DOSAGE Greater than 40,000 microwatt-sec per square cm at 254 nanometers TRANSMISSIVITY 65% WORKING PSI 40 PSI MAX PSI 80 PSI BURST PRESSURE MAX GPM 84 GPM